card-img

Description

The medical gas outlet shall be an Amico Alert-1 series.The Passive Outlets shall be manufactured with a 7-1/4 [184 mm] length type K 7/8 [22 mm] outside diameter, 3/4 nominal size copper inlet pipe stub, which is silver brazed to the outlet body. Suction inlets are not supplied with a secondary check valve. A pressure plug is provided for testing purposes, rated at 150 psi [1,034 kPa]. Outlets bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.A large color coded front plate shall be used for ease of gas identification and aesthetic appeal.A one piece chromed fascia plate shall frame the outlet. With the back rough-in mounted, the outlet shall adjust from 3/8 to 1 [10 mm to 25 mm] variation in wall thickness.The outlet shall be of modular design and include a gas specific 16ga [1.6 mm] steel mounting plate designed to permit on-site ganging of multiple outlets, in any order, on 5 [127 mm] spacing.The Passive Front Latch-Valve Assembly is assembled with an aluminum adapter, which accommodates 19/33 mm hose.All M.R.I outlets are manufactured form nonferrous materials.All outlets shall be cleaned and degreased for medical service, factory assembled and tested.Amico products comply with NFPA 99. Amico Medical Gas Outlets, Amico Wall Outlets, Amico, Passive Evac WAGD/AGSS Wall Outlet.

Additional information

Gas Type

, , , , , ,

Spec sheets

ape_sp_pass_evac_agss_outlt_1