Skip to content
    New: Medical Gas Outlet Retrofit & Rebuild Matrix — cross-reference legacy Chemetron, Ohio Diamond, Puritan-Bennett & more →
    ASSE Certified 24/7
    Medical Gas Service

    Medical Gas Installation: ASSE 6010 Certified Nationwide Service

    Medical Testing SolutionsMay 12, 20183 min read
    Share
    Medical Gas Installation: ASSE 6010 Certified Nationwide Service

    Medical gas installation is one of the most highly regulated construction activities in healthcare. Every component, from copper piping and brazed joints to zone valve boxes and alarm panels, must be installed by ASSE 6010-certified medical gas installers and verified before any patient receives care. At Medical Testing Solutions, we partner with licensed installation contractors nationwide to deliver turn-key medical gas piping systems for new construction, renovations, and system expansions.

    NFPA 99 Installation Requirements

    The NFPA 99 Health Care Facilities Code governs every aspect of medical gas system installation. Key requirements include:

    Personnel Qualifications

    • All installers must hold ASSE 6010 certification, this applies to every person who touches the piping system, not just the lead installer
    • Brazer qualifications must comply with ASME Section IX or AWS standards
    • Installer certifications must be current and verifiable

    Piping Materials and Methods

    • Type K or L copper tube (ASTM B819 medical gas tube), cleaned for oxygen service
    • Brazed joints using BCuP-5 (15% silver) or higher alloys, no soldering permitted
    • Nitrogen purge during brazing to prevent oxidation inside the pipe
    • All piping must be properly supported, labeled, and protected per code

    Required Testing by the Installer

    Before the system can be verified by an ASSE 6030 verifier, the installer must complete:

    1. Initial blow-down, remove debris and particulate from all piping
    2. Standing pressure test, 24-hour minimum at 1.5× operating pressure
    3. Cross-connection test, preliminary check at each outlet
    4. Piping purge test, verify gas purity meets NFPA 99 thresholds
    5. Complete documentation of all test results for the verifier

    Types of Medical Gas Installation Projects

    New Construction

    Complete medical gas piping systems for new hospitals, ambulatory surgery centers, dental offices, and veterinary facilities. MTS provides:

    Renovations and Additions

    Adding outlets, extending piping runs, or upgrading systems in existing facilities requires the same level of compliance as new construction. Every addition must be verified before use.

    Dental Office Medical Gas Systems

    Dental offices have unique requirements including central nitrous oxide/oxygen delivery systems, scavenging systems, and dental flowmeter installations. MTS specializes in dental facility gas systems.

    Veterinary Anesthesia Systems

    Veterinary hospitals and clinics require properly installed medical gas systems for anesthesia delivery. Our installers understand the unique requirements of veterinary facilities.

    Why Choose MTS for Medical Gas Installation?

    • Nationwide network of ASSE 6010-certified installation contractors
    • Same-day quoting on equipment and installation services
    • Authorized distributor for top medical gas manufacturers
    • Turn-key service, from design review through final verification
    • ASSE 6000 series training ensures our installers maintain current certifications
    • Competitive pricing as direct distributors for major equipment brands

    Post-Installation Requirements

    After installation, every medical gas system must undergo:

    1. Medical gas verification by an independent ASSE 6030 verifier
    2. System documentation including as-built drawings and test reports
    3. Annual inspections by ASSE 6020 inspectors
    4. Ongoing preventative maintenance by ASSE 6040 technicians

    Frequently Asked Questions

    Yes. MTS partners with ASSE 6010-certified installation contractors nationwide. We manage the full project lifecycle from equipment procurement through [final verification](/medical-gas-verification).

    All installers must hold current ASSE 6010 Medical Gas Installer certification issued through NITC or an equivalent credentialing body approved by your state.

    Timeline depends on project scope. A small dental office may take 2–3 days, while a hospital wing could take several weeks. [Contact us](/contact-us) for a project-specific estimate.

    Absolutely. As authorized distributors for leading manufacturers, we provide equipment at competitive prices bundled with professional installation services.

    This article is provided for educational purposes and reflects industry standards as of publication. Always verify against current NFPA 99, CGA, and AHJ requirements. Medical Testing Solutions is ASSE-certified and ready to help — contact us for facility-specific guidance.

    Request a quote for your facility

    Talk with Medical Testing Solutions about your next inspection, repair or equipment request.

    Get a quote in 1 business day

    I agree to receive text messages from Medical Testing Solutions, L.L.C. at the phone number provided, including informational and marketing messages. Consent is not a condition of purchase. Message frequency varies. Message & data rates may apply. Reply STOP to opt out or HELP for help. See our Privacy Policy and Messaging Terms.

    Prefer to talk? Call (754) 315-1078

    Related articles