A lot of practice owners put off booking a medical gas inspection for one unglamorous reason: they don't know what it involves, and they assume it means shutting down surgery for a day. It doesn't. Here's exactly what happens, start to finish, so there are no surprises.
What to Expect During a Veterinary Medical Gas Inspection

Before the visit
We start with a few questions so the tech arrives ready instead of discovering your setup on the clock: what gases you run (oxygen, vacuum, medical air, nitrous if any), whether they're piped or portable, how many treatment and surgery stations you have, and whether you have any drawings or prior reports. If you've never been inspected and don't have documentation, that's fine, mapping the system is part of the job.
On site, step by step
A veterinary inspection walks the whole chain, source to outlet:
- Source equipment, concentrators, manifolds, compressors, and vacuum pumps checked for condition, pressure regulation, and (on cylinder systems) whether the changeover actually works.
- Alarms and monitoring, where systems are piped, master and area alarms are tested to confirm they actually signal a problem.
- Outlets and inlets, every oxygen, air, and vacuum station tested for correct flow and pressure, because the source being fine doesn't mean the far outlet is.
- Leak and cross-connection testing, confirming oxygen delivers oxygen and vacuum pulls vacuum at every point, with no crossed lines and no hidden leaks.
- Scavenging / WAGD, the effectiveness test that protects your staff, often the one nobody has ever run.
How long, and how disruptive
Most single-location practices are done in a few hours, and we schedule around your surgery board, early, late, or on a lighter day, so we're not standing between you and a patient. Larger or fully piped hospitals take longer, but the work is planned so areas come offline one at a time, not all at once.
What you walk away with
A documented report: every system and outlet tested, pass/fail clearly marked, and any deficiency described in plain language with the corrective options spelled out. That report is what you hand to your accreditor, your AHJ, or your insurer when they ask, and what protects you if there's ever an incident. If something fails, you get a straight explanation of what it'll take to fix it, not a sales runaround.
How often
Annually is the standard, and again any time you add, move, or modify equipment. Systems drift, pumps wear, and a setup that passed last year can develop a leak or a weak outlet this year, which is the entire point of testing on a schedule instead of waiting for a failure.
The hard part isn't the inspection. It's deciding to book the first one. Once your hospital is mapped and on a cycle, it becomes a routine afternoon, and one less thing that can blindside you.
Frequently Asked Questions
Request a quote for your facility
Talk with Medical Testing Solutions about your next inspection, repair or equipment request.