Medical Gas Service
Compliance & Standards
Line Isolation Monitor Inspection in San Antonio, TX: A Compliance Guide
Medical Testing SolutionsJune 25, 2026

Frequently Asked Questions
According to NFPA 99, Chapter 6.3.3.3.2, all Line Isolation Monitors must be tested and documented at least every 12 months, or after any repair or renovation to the isolated power system.
A wet procedure location is an area, defined by NFPA 99, where procedures involving liquids are common and could create a conductive path. These include most operating rooms, cardiac cath labs, and certain ICU or delivery rooms.
They can only perform inspections if they are properly qualified and certified. NFPA 99 requires testing to be done by qualified individuals, such as an ASSE 6040 Certified Medical Gas Systems Verifier, who has the specific training and calibrated equipment required.
A LIM is a predictive device that alarms when it detects a potential for microshock (a fault condition), but it *does not* interrupt power, which is critical for life-support equipment. A GFCI is a reactive device that *does* interrupt power when it detects a ground fault, making it unsuitable for critical care areas.
The cost of a line isolation monitor inspection service depends on several factors, including the number of LIMs in your facility, their accessibility, and the level of documentation required. Contact Medical Testing Solutions for a detailed, no-obligation quote tailored to your hospital's needs.
Request a quote for your facility
Talk with Medical Testing Solutions about your next inspection, repair or equipment request.