Vacuum Suction Regulator Repair
Complete inspection, ultrasonic cleaning, and OEM-component rebuild — $95 flat per unit. Free return shipping anywhere in the U.S.
Bulk orders (25+ units)? Request volume pricing →
Every Major Vacuum Regulator Brand
How It Works
Request Service
Tell us how many units, the brand, and any visible damage. We confirm the $95 flat rate and email shipping instructions.
Decontaminate & Ship
Decontaminate per CDC/OSHA, tag each unit 'Decontaminated,' and ship to our lab. You cover outbound freight.
Inspection & OEM Repair
Full visual inspection, ultrasonic cleaning, and rebuild with OEM components — gauges, diaphragms, seats, and seals.
Free Return Shipping
We function-test, certify, and ship your repaired regulators back at no charge. Typical turnaround: 5–7 business days.
Complete Repair with OEM Parts
$95
Per unit — fully repaired and certified
- Full visual & functional inspection
- Disassembly and ultrasonic cleaning
- OEM component rebuild (diaphragm, seat, O-rings, filter)
- Gauge accuracy verification
- Vacuum range & leak testing
- Pass/fail tag with technician sign-off
- Free return shipping nationwide
Biohazard Shipping Requirements
Vacuum suction regulators used in clinical settings are regulated as potentially contaminated medical devices. To protect handlers and comply with federal regulations, every shipment must meet the following requirements before it leaves your facility.
Required Before Shipping
- • Decontaminate each regulator per CDC/OSHA guidelines using an EPA-registered hospital-grade disinfectant
- • Affix a "Decontaminated" tag or label to every unit with the date and technician initials
- • Visibly cap or seal the vacuum inlet to prevent residual fluid release
- • Bag each unit individually in a sealed clear poly bag
- • Include a signed Decontamination Certificate inside the carton (we email a template when you place your order)
Packaging & Carrier Compliance
- • Use a rigid corrugated outer carton with at least 2" of cushioning on all sides
- • Decontaminated medical devices may ship as standard ground freight (FedEx, UPS, USPS) — do not ship as UN3373 Category B
- • Untreated / known-contaminated units must not be shipped. They are regulated medical waste under DOT 49 CFR §173.196 and require a licensed medical-waste hauler
- • Comply with IATA Packing Instruction 650 if shipping by air
- • Write your service order number on two sides of the outer carton
Compliance reference: OSHA Bloodborne Pathogens Standard 29 CFR §1910.1030(d)(2)(xiii), CDC Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2019), DOT 49 CFR §173.196 / §173.197, IATA DGR Packing Instruction 650, and ANSI/AAMI ST79. Shipments arriving without proof of decontamination will be refused at our facility at the shipper's expense.
Shipping Information
Sending Your Regulators
You cover the cost of inbound shipping. Write your service order number on two sides of the carton.
Attn: Vacuum Regulator Repair
501 East Las Olas Blvd, Ste. 300
Fort Lauderdale, FL 33301
Return Shipping
Free return shipping nationwide. Repaired and certified regulators are returned via FedEx or UPS Ground to the address you provide when placing your order. Expedited return options available on request.
Our 10-Point Inspection & Repair Process
Every vacuum regulator goes through the same documented process — no shortcuts.
90% faster than our 24-hour service commitment.
$95 Per Unit — All Brands, OEM Parts, Free Return Shipping
Tell us quantity and brand and we'll send shipping instructions, a decontamination certificate template, and your service order number within one business day.
Craftsmanship Warranty Included
Every service is backed by our craftsmanship warranty — we stand behind our work.
Sizing a medical vacuum plant?
Enter your room counts and get a peak SCFM demand plus a recommended duplex, triplex, or quadruplex configuration sized to NFPA 99 redundancy — free, no login.
Frequently Asked Questions
Explore Our Other Services
Medical Testing Solutions provides a complete range of medical gas services nationwide.
Medical Gas Verification
ASSE 6030 verification for new installs & renovations
Annual Inspections
ASSE 6040 annual compliance inspections
Medical Gas Installation
ASSE 6010 certified pipeline installation
Medical Gas Maintenance
Preventative maintenance & emergency repairs
Medical Gas Training
ASSE 6010–6040 certification courses
Line Isolation Monitor Testing
NFPA 99 LIM testing & calibration
Dental Flowmeter Repair
$950 flat-rate repair & NIST calibration
USP 797 & 800 Certification
Cleanroom PEC certification & viable sampling
WAG & Chemical Vapor Monitoring
AIHA-accredited monitoring badges & lab analysis
Chemical Exposure Monitoring
N₂O, formaldehyde, glutaraldehyde/OPA & O₂ deficiency testing
Industries We Serve
Hospitals, ASCs, dental, veterinary, dermatology & more
All Medical Gas Services
Complete service overview & hub page