Air/Oxygen Blender Repair & Certification
Complete inspection, ultrasonic cleaning, and OEM-component rebuild — finished with a serialized Certificate of Service & Calibration. Free return shipping anywhere in the U.S.
Bulk service (25+ blenders)? Request volume pricing →
Every Major Air/Oxygen Blender Brand
How It Works
Request Service
Tell us how many blenders and the brand/model. We confirm pricing and email shipping instructions plus a decontamination certificate template.
Decontaminate & Ship
Decontaminate per CDC/OSHA, tag each unit 'Decontaminated,' and ship to our lab. You cover outbound freight.
Inspection, Cleaning & OEM Repair
Full inspection, ultrasonic cleaning, rebuild with OEM components, and calibrated FiO₂ verification on a NIST-traceable analyzer.
Certificate & Free Return Shipping
Each blender ships back with a serialized Certificate of Service & Calibration. Typical turnaround: 5–7 business days.
Flat-Rate Pricing
Two tiers based on blender type. Both include full inspection, ultrasonic cleaning, OEM rebuild, NIST-traceable FiO₂ calibration, serialized certificate, and free return shipping.
Standard Overhaul & Calibration
$225
Per unit — small-block blenders
Covers most small-block blenders, including Bird, Maxtec, Bio-Med, and Ohmeda.
- Complete visual & functional inspection
- Disassembly and ultrasonic cleaning
- OEM rebuild kit (diaphragms, seats, O-rings, filters, alarm reed)
- 21%, 40%, 60%, 80%, 100% FiO₂ accuracy verification
- Inlet pressure & alarm function test
- Bleed-flow and balance-module verification
- Serialized Certificate of Service & Calibration
- Free return shipping nationwide
Specialty or High-Flow Blenders
$425
Per unit — high-flow & specialty
Covers units like Sechrist, Precision Medical, and Heliox models.
- Complete visual & functional inspection
- Disassembly and ultrasonic cleaning
- OEM rebuild kit (diaphragms, seats, O-rings, filters, alarm reed)
- 21%, 40%, 60%, 80%, 100% FiO₂ accuracy verification
- Inlet pressure & alarm function test
- Bleed-flow and balance-module verification
- Serialized Certificate of Service & Calibration
- Free return shipping nationwide
If unrepairable: no charge retained. Major component replacements (proportioning module, alarm assembly) quoted separately with your approval.
Pricing by Brand & Model
Flat-rate overhaul pricing on every blender we service. All prices include ultrasonic cleaning, OEM rebuild kit, NIST-traceable FiO₂ calibration, serialized certificate, and free return shipping. Don't see your model? Ask us — we likely service it.
Bird (Viasys / CareFusion)
Standard Tier
- 03800A
- 03920A
- 10030A MRI
- Sentry
- 10040A Series
Maxtec
Standard Tier
- MaxBlend
- MaxBlend 2
- MaxVenturi
Bio-Med Devices
Standard Tier
- NEO2
- 2001
- 2002
- 2003
- 2003GE (blender only)
- 2004
Ohmeda
Standard Tier
- Microblender
- PMR 2
- Giraffe / Panda (blender only)
Sechrist
Specialty / High-Flow Tier
- 3500HL
- 3500CP-G
- 3600
- Hyperbaric Series
Precision Medical
Specialty / High-Flow Tier
- PM5200
- PM5300
- PM5400 High-Flow
Heliox Blenders
Specialty / High-Flow Tier
- All He/O₂ models (12-month warranty)
Other Micro-blenders
Standard Tier
- Drager
- Tri-Anim
- Allied Healthcare
- Gentec OxyBlend
24-Month Warranty — Double the Industry Standard
Most competitors warranty their blender repairs for just 90 days to 12 months. We back every overhaul for a full 24 months — because we use OEM rebuild kits and verify FiO₂ accuracy on NIST-traceable analyzers.
Warranty covers defects in workmanship and OEM components installed by MTS. Damage from misuse, contaminated gas supply, or unauthorized modification is excluded.
Certificate of Service & Calibration
Every blender ships back with a serialized certificate documenting the exact work performed, the calibration standard used, and the FiO₂ readings at each test point — ready to drop into your medical equipment management binder.
- Serial number, make, model, and date of service
- Technician name and ID
- Calibration equipment used (NIST-traceable, with cert ID)
- FiO₂ readings recorded at each test point
- Pass/fail status and recommended next-service date
- Issued on MTS letterhead — accepted by Joint Commission, DNV, CMS, and state surveyors
Biohazard Shipping Requirements
Air/oxygen blenders used in clinical settings are regulated as potentially contaminated medical devices. To protect handlers and comply with federal regulations, every shipment must meet the following requirements before it leaves your facility.
Required Before Shipping
- • Decontaminate each blender per CDC/OSHA guidelines using an EPA-registered hospital-grade disinfectant
- • Affix a "Decontaminated" tag to every unit with date and technician initials
- • Cap or plug the Air and O₂ inlet fittings and the outlet barb
- • Bag each unit individually in a sealed clear poly bag
- • Include a signed Decontamination Certificate inside the carton (we email a template with your order)
Packaging & Carrier Compliance
- • Use a rigid corrugated outer carton with at least 2" of cushioning on all sides
- • Decontaminated medical devices ship as standard ground freight (FedEx, UPS, USPS) — do not ship as UN3373 Category B
- • Untreated / known-contaminated units must not be shipped. They are regulated medical waste under DOT 49 CFR §173.196 and require a licensed medical-waste hauler
- • Comply with IATA Packing Instruction 650 if shipping by air
- • Write your service order number on two sides of the outer carton
Compliance reference: OSHA Bloodborne Pathogens Standard 29 CFR §1910.1030(d)(2)(xiii), CDC Guideline for Disinfection and Sterilization in Healthcare Facilities (2008, updated 2019), DOT 49 CFR §173.196 / §173.197, IATA DGR Packing Instruction 650, and ANSI/AAMI ST79. Shipments arriving without proof of decontamination will be refused at our facility at the shipper's expense.
Shipping Information
Sending Your Blenders
You cover the cost of inbound shipping. Write your service order number on two sides of the carton.
Attn: Air/Oxygen Blender Repair
501 East Las Olas Blvd, Ste. 300
Fort Lauderdale, FL 33301
Return Shipping
Free return shipping nationwide. Repaired and certified blenders are returned via FedEx or UPS Ground to the address you provide when placing your order. Expedited return options available on request.
Our 10-Point Inspection & Repair Process
Every blender goes through the same documented process — no shortcuts.
88% faster than our 24-hour service commitment.
All Brands · OEM Parts · Certificate Included · Free Return Shipping
Tell us quantity, brand, and model and we'll send pricing, shipping instructions, a decontamination certificate template, and your service order number within one business day.
Craftsmanship Warranty Included
Every service is backed by our craftsmanship warranty — we stand behind our work.
Frequently Asked Questions
Explore Our Other Services
Medical Testing Solutions provides a complete range of medical gas services nationwide.
Medical Gas Verification
ASSE 6030 verification for new installs & renovations
Annual Inspections
ASSE 6040 annual compliance inspections
Medical Gas Installation
ASSE 6010 certified pipeline installation
Medical Gas Maintenance
Preventative maintenance & emergency repairs
Medical Gas Training
ASSE 6010–6040 certification courses
Line Isolation Monitor Testing
NFPA 99 LIM testing & calibration
Dental Flowmeter Repair
$950 flat-rate repair & NIST calibration
USP 797 & 800 Certification
Cleanroom PEC certification & viable sampling
WAG & Chemical Vapor Monitoring
AIHA-accredited monitoring badges & lab analysis
Chemical Exposure Monitoring
N₂O, formaldehyde, glutaraldehyde/OPA & O₂ deficiency testing
Industries We Serve
Hospitals, ASCs, dental, veterinary, dermatology & more
All Medical Gas Services
Complete service overview & hub page