card-img

Description

The Master Alarm system shall be an Amico Alert-2 series, complete with a five-year warranty.Each module shall be microprocessor based and field adjustable. Each signal contains a green LED indicator for normal and a red LED indicator for abnormal conditions. When a fault occurs, the green LED turns off and the red LED illuminates, and the audible alarm sounds. The red LED flashes until the front panel alarm mute button is pressed. After the alarm mute button is pressed, the red LED remains illuminated but does not flash. The red indicator automatically turns off and the green LED illuminates when the fault is corrected. A repeat alarm function shall, when enabled, be capable of turning on the buzzer again, after a preset time, if the fault condition has not been rectified.A maintenance mode shall, when enabled, latch the alarms, requiring a reset after the alarm condition has been rectified. This is to assist in tracking down wiring problems or faulty field devices. The master alarm shall identify the last alarm condition by flashing, while the already acknowledged alarm shows a continuous red signal.A repeat alarm function shall, when enabled, be capable of turning on the buzzer again, after a preset time, if the fault condition has not been rectified. Each module shall handle 10 functions and up to 6 modules can be accommodated per standard box for a total of 60 functions. Master alarms shall be modular in construction and shall be capable of adding extra modules in the field. The Alarm system shall be a closed circuit self monitoring type. A green ?POWER? light shall provide indication that the unit is energized. In addition ?TEST? and ?ALARM MUTE? buttons shall be easily accessible to operate and test the unit. Every module shall be field upgradable to allow for interfacing to a building management system with the addition of an add-on circuit board which plugs into the master module. The box shall be fabricated from 18 gauge [1.3 mm] steel and the box mounting brackets shall be adjustable to accommodate for different thickness of the wall. Input power to the Amico Alert-2 alarm is: 115 VAC to 220 VAC, 50 to 60 HZ. The alarm is UL Listed. Amico products comply with NFPA-99 and CSA Z7396.1. The Amico Alert-2 Alarm complies with the following electromagnetic compatibilty standards: FCC Part 15 Class A and ICES-003 Class A.

Specification Sheet

acp_sp_mast_alrm.pdf

Frequently Asked Questions

Yes, MTS has various partnerships with a number of medical gas installation contractors. Each sub contractor employees qualifying ASSE 6010 Medical Gas Installers ready to meet your needs.
A Medical Gas Certification (Also called a medical gas verification) is an NFPA required inspection and approval of newly installed medical gas delivery systems. All newly in installed medical gas pipeline and equipment must be certified by an ASSE 6030 before use.
Answer: Per NFPA guidelines, it is a requirement for any facilities using medical grade gases for the purpose of human consumption to have their gas delivery systems inspected by and ASSE 6040. Read more about Medical Gas Inspections Here.
Answer: Yes, MTS provides annual medical gas inspections. We provide discounts on Annual Inspections when you sign multi year contracts. Read more about Medical Gas Inspections Here.
Answer: The Plumbing and Mechanical Systems Board issues medical gas piping certification to medical gas system installers who possess valid certification from the National Inspection Testing Certification Corporation or NITC. Certification from other organizations may be considered with approval of the board.
Yes, we can adapt any fittings to the desired hosing for any medical grade gas. High pressure gases such as Nitrogen can also be accommodated.
Yes, Those items for shipment to countries outside of the U.S. may be subject to taxes, customs duties and fees levied by the destination country (“Import Fees”). The recipient of the shipment is the importer of record in the destination country and is responsible for all Import Fees.
With respect to each item for which Import Fees have been calculated, you authorize Export or Merchant (as applicable) to designate a carrier (“Designated Carrier”) to act as your agent with the relevant customs and tax authorities in the destination country, to clear your merchandise, process and remit your actual Import Fees for such item.
Import Fees Deposit” represents an estimate of the Import Fees that will be levied on the items in your order for shipment to countries outside of the U.S. By placing your order, you agree to allow Export and/or Merchant (as applicable) to collect the Import Fees Deposit for the applicable items in your order. This deposit will be used, on your behalf, to reimburse the Designated Carriers for the import fees that they have paid on your behalf to the appropriate authorities of the destination country.
Answer: Per NFPA guidelines, it is a requirement for any facilities using medical grade gases for the purpose of human consumption to have their gas delivery systems inspected by and ASSE 6040. Read more about Medical Gas Inspections Here.

Vacuum Pumps
And Compressors

Medical Gas Services

Verifications

MTS is an ASSE 6030© Licensed medical gas verification company and providing NFPA code compliant medical gas certification services all across the U.S.

Read More

Inspections

MTS is an ASSE 6020© Licensed medical gas inspection service company, providing annual inspections on medical gas systems throughout the U.S.

Read More

Installations

MTS provides medical gas systems installations per the NFPA 99  using our certified ASSE 6010© Licensed medical gas plumbers all across the U.S.

Read More

Maintenance

MTS is an ASSE 6040© Licensed medical gas maintenance company providing the highest quality medical gas maintenance services all across the U.S.

Read More