Amico Ohmeda Front Latch Assembly Outlet

Description

The Amico Ohmeda Front Latch Assembly Outlet is a component of medical gas outlets used in hospitals and healthcare facilities. The front latch assembly is the part of the outlet that holds the medical gas terminal unit (i.e., the medical gas outlet). It is typically made of a durable material such as stainless steel or aluminum, and is designed to withstand repeated use and cleaning. The Amico Ohmeda Front Latch Assembly Outlet is specifically designed for use with Ohmeda medical gas outlets, which are commonly used in anesthesia and respiratory therapy applications. The latch assembly is engineered to ensure a secure and reliable connection between the outlet and the terminal unit. The front latch assembly outlet is typically installed on a wall or other surface in a medical gas pipeline system, and connects to the gas supply through a series of valves and regulators. The outlet is designed to deliver a specific type of medical gas, such as oxygen, nitrous oxide, or medical air, at a controlled flow rate and pressure. Regular maintenance and testing of medical gas outlets, including the front latch assembly, is important to ensure the safety and reliability of the system. It is recommended that medical gas outlets be tested and inspected by a qualified technician on a regular basis to ensure that they are functioning properly and meeting all applicable safety standards. Outlets shall be manufactured with a 7-3/4″ (197 mm) length type K 1/2″ (12.7 mm) outside diameter (3/8″ [9.5 mm] nominal) size copper inlet pipe stub which is silver brazed to the outlet body. The body shall be of 1-5/16″ (33 mm) diameter, one piece brass construction. For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi (1,379 kPa) in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module. A large color coded front plate shall be used for ease of gas identification and aesthetic appeal. The latch-valve assembly shall accommodate up to 3/4″ (19 mm) wall thickness. The latch valve assembly shall be Ohmeda Diamond (Ohio Medical) Quick Disconnect compatible and accept only corresponding Ohmeda type gas specific adapters. All M.R.I. outlets are manufactured from nonferrous materials.All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested. The outlets are UL Listed and ETL Listed. Amico products comply with NFPA 99 and CSA Z7396.1. Amico Medical Gas Outlets, Amico Console Outlets, Amico, Ohmeda Compatible Console Outlet.